Complete Surf System

I have the PCB designs for the Complete Surf System done and ready to send off for manufacturing.  This is the main controller that runs all the logic code and drives the display.  The GPS, and circuitry for reading the level of the ballast bags with a pressure transducer, gyroscope and tach/fuel inputs are also on this board.  This board will mount on top of the relay driver board.

This is the relay driver board.  It gets a signal from the main controller board and controls the relays that are used to fill or empty the ballast bags, extend or retract the surf devices and extend or retract the wake plate.  It also has the circuitry to ready the state of the manual ballast switches, so the main controller can keep track of how much weight has been pumped into or out of each back manually.